How To Tell If You're Prepared To Go After Saab 9-3 Key Replacement
How to Replace saab key fob repair For the Saab 9-3
Saab owners have a distinct set of steps to take to add another key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. Then it is necessary to purchase a new transponder. key have to be purchased.
Change your keys regularly to prevent one from wearing out faster than the other. This will also help keep your keys in pristine condition.
Replacement Case
Unlike the classic Saab keys of old keys, the modern key fobs contain electronics which makes it hard to duplicate. That has made car theft considerably more difficult than it was a few years ago. However, it also has made the replacement of lost keys a comparatively costly endeavor.
Saab 9-3 owners should have two keys working. If one is lost it costs a lot of money to add another to the car because it involves replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 to do this.
There are ways to reduce the high price. Some parts providers will search for the code from an extra key (usually the same one that opens the doors and turns on the ignition) and cut a brand new key blade out of metal for less than the dealer's cost. The key must be the exact same as the original to allow it to function in your vehicle.
Follow these steps to replace the case. You'll require a flathead and a lot of patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. Once you have the case open, take the electronics out and put them back into your new case. Place the key with the correct badge inside the case.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable part that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates the procedure for replacing the battery for the remote fob in just four simple steps. This tutorial should work with any modern Saab key fob. However, the process might differ slightly.
The button is normally located near the Saab logo on the back of the fob. This button is typically located on the back of your fob next to the Saab Logo. Next, use a flathead screwdriver into the small hole inside this button. This should be sufficient to open the fob case in order to change the battery.
Once you have installed the new batteries CR1632, it is possible to restore the remote key fob. Then, you can program it into your car. The procedure should take no more than an hour or less. This is a simple process that doesn't require any special tools.
If you lose a key the process is more complicated however, it can be completed. The dealer has to find the VIN number of the car and then order a new key blade and TWICE module, both with the proper unique code. Then, they'll need to cut the replacement key and then program it using an innovative software tool called MDI.
Replacement Key Fob
The key fob comes with a battery that is used to lock and unlock your vehicle. The batteries last for a period of that is a long time, and they eventually expire. This is a frequent issue for all vehicles. The good news is that you can replace the battery on most key fobs, and not have to replace the entire case. You can purchase replacement fobs on Amazon that have all the electronics already in place, so you'll just pop open the case and replace the batteries in the original case. It is necessary to remove the emergency key before you replace the batteries. To do this, place a small screwdriver that is flat into the slot in the middle of the. The case should split when you work the screwdriver all around it.
When you are ready to replace the keys, ensure you have spare keys, because this can cut down the total cost by a significant amount. If you have a spare, you can ask the dealer to cut the new key and program it to the car, which is much cheaper than replacing the whole key fob.
If you don't have a spare you can add an additional key to your car, however this requires a lot of research and effort. Adding a second key costs around a hundred dollars and it also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.
Replacement Ignition
In contrast to earlier Saab automobiles, the new SAAB 9-3 models feature a much more sophisticated alarm system that is dependent on a coded keys. If you lose your primary key, it could be expensive to add another one since the car needs to include a computer and be programmed to accept a new key. Even dealers can charge hundreds of dollars to program an entirely new key, even if they're unable to complete the task.
If you've lost only one working key the dealer will replace the computer in your car (known as the CIM or SAAB TWICE) in order to make a replacement, and will charge you a premium price for it. Instead we can reprogramme the EEPROM of your current car computer to make it ready for a new key, saving you over 50% of what you'd be charged at a dealership.
If you've owned a 9-3 from SAAB for a long time and you're aware of the ignition keys aren't very durable. If your ignition key is not functioning properly, it is time to consider replacing it. They can become sticky and the buttons are known to fall off. Luckily, replacing the ignition key isn't as difficult as it seems and can be done fairly quickly using the proper tools.